capsule Polisher

JFP-110A Capsule polishing and rejecting machine



The machine is suitable for capsule polishing, electrostatic eliminate and capsule rejecting, such as get rid of light, vacant, fragment and other separation capsules, all types of capsules are applicable the machine, no changing mould.
The machine is the most ideal corollary equipment for capsule filling.
The machine is a special model for viscous medicine powder. 



- The capsules are polished between the screen bucket and hair brush. the hair brush adopts advanced screw type structure, it is connected with the main shaft by quick clamp, this is very Convenient for disassembly, assembly and cleaning.
- After being polished, the capsules automatically enter the system for rejecting empty capsules, after being sieved by airflow, the empty capsules are blown into the other container, acceptable capsules enter finished product bucket. Thus, it avoids the contact of human beings With the medicine powder, ensures the quality of medicine.
- The hair brush is very soft, no scratch the surface of capsule; meanwhile, the hair brush will not generate electrostatic charges.
- The whole machine was made of 304 stainless steel, no pollution, meet the GMP standard.
- The whole unit is connected by hook-and-loop fasteners, it takes only 1 minute to assemble and disassemble the unit without any tool.
- The dust collection part is at the bottommost of dust collection though, it is used to thoroughly Collect the medicine powder.
- The unit can be adjusted at high and low directions, and the rotation at right and left directions can also be adjusted.
- There is two safety switches on the machine, ensure to use safely.
- The rotational speed of the motor was controlled by frequency converter.


Technical Parameters




150000 capsules/hour



Power supply

220V/50HZ 1 phase or customized

Air supply

0.25 m3/min, 0.3 MPa


40 kg

Overall size

800x550x1000 mm